Check out our video below to see the Proton FW 5180 Gaussmeter by FW Bell in action.
Hi I’m Holly with Mono Machines and this is the FW 5180 Gaussmeter by FW Bell. It measures the gauss level of your Degausser. Come on in check it out. This plastic block is custom made for your T4 for your use with your Pro. Holds it right here, all you have to do is drop it in the chamber to get your gauss reading. So we are gonna do that now, we are going to drop it in and press the gauss, make sure the probe is down. It will begin to work and that was really fast, as you can see we alredy have the negative gauss field, so the first pulse measures the negative gauss field, we have got over 20000 which is good, up here we have got probe cord, our power cord. This runs on AC, DC power or on batteries. Once we have done that we are gonna ahead and press reset and the second pulse is going to measure the positive gauss field. Now this Gaussmeter gives you the piece of mind that your Degausser is still working properly and effectively destroying your data. Thanks for watching, I’m Holly with Mono Machines.
Proton FW 5180 Quick Overview
- Basic DC Accuracy: 1.1%
- Frequency Bandwidth: DC-25 kHz
- Update Rates: 4 readings/second (Display); 100K samples/second (Analog Output)
- Readings: Gauss, Tesla, Amps/Meter
- Operating Temperature: 0 to 50 degrees Celsius
- Power: 4AA Batteries (not included)